A collection of mineral and metallic decorative effects for interiors and exteriors that can be combined to recreate the natural look of oxidation, resulting in a refined and contemporary designer finish that is unaffected by the passage of time and is resistant to any fashion or trend.
Cement-based wall surfaces, gypsum, plasterboard, and any other suitably prepared wall surface.
Surface preparation: Proper substrate preparation will ensure the best results in terms of product yield, appearance, and long-term finish resistance. Proper substrate preparation will ensure the best results in terms of product yield, appearance, and long-term finish resistance
New unpainted surfaces: Clean the surface and remove all possible traces of dust or dirt. Treat the substrate with a priming coat of ADIFIX thinned as specified and allow to dry, then apply one or two basecoats of FONDO UNIVERSALE thinned in the recommended doses.
Previously painted surfaces: Check that the state of the existing paintwork is in excellent condition; if so, proceed directly with the application of FONDO UNIVERSALE as described in the previous paragraph. If the surface shows signs of defects, such as peeling or chalking, remove any loose parts that would compromise the correct adhesion of the product, then proceed as indicated hereabove for new unpainted surfaces.
1. Brush or roller apply a coat of the main product colour chosen. This will be the colour that will be most noticeable in the final effect to be produced.
2. Once the first coat has dried well, using a brush and/or a sponge, apply one or more of the three remaining colours in the range. Use irregular and random strokes, allowing the first coat to show through in order to create the desired final pattern.
N.B. After the application of the basecoat, you can also make patterns with stencils or create materic effects using the texturing plasters DECORDEK or OLD FASHION.
Furthermore, it is possible to protect the finishing with an additional gloss or satin topcoat using one of the specific products in the Adicolor range. Prior to application, consult the Technical Data.
